160×160方坯火焰切割机设计.doc

资料分类:机械工程 上传会员:笑笑 更新时间:2014-07-17
需要金币1000 个金币 资料包括:完整论文 下载论文
转换比率:金额 X 10=金币数量, 例100元=1000金币 论文字数:15051
折扣与优惠:团购最低可5折优惠 - 了解详情 论文格式:Word格式(*.doc)

摘  要:火焰切割机是利用各种可燃气体和氧气的燃烧来切割钢坯的。火焰切割机的主要特点是:投资费用比较少,切割设备的外形也较小,切缝较平整,并不受铸坯温度和断面大小的影响,特别是大断面的铸坯,其优越性更明显,但切割时间较长,切缝又宽,切口处的金属损耗严重,污染也严重。

  火焰切割机通常由切割机构、同步机构、返回机构、断面检测器、定尺机构及氧、乙炔管路系统等部分组成。切割机构是火焰切割机的关键部分,它主要由切割枪和传动机构组成。同步机构是指使切割小车与连铸坯同步运行的机构。切割小车是在与铸坯无相对运动的的条件下切割钢坯的。返回机构是指采用普通小车运行机构。定尺机构是由气缸推动测量辊,使之顶在铸坯的下面,靠摩擦力使之转动,触发脉冲器发出脉冲信号。

关键词:火焰切割机 切割机构 同步机构 返回机构 定尺机构

 

Abstract:Flame cutting machine is to use a variety of the combustion of combustible gas and oxygen to cut billet. The main characteristics of the flame cutting machine is: low investment cost, cutting equipment of small shape, kerf smooth, is not affected by the billet temperature and section size, especially for large section casting, its superiority is obvious, but the cutting time is longer, the slit is wide, the loss of metal incision is serious, also serious pollution.

    The cutting mechanism is a key part of the flame cutting device. It is mainly composed of a gun and gear cutting. A synchronization mechanism refers to the cutting trolley and continuous casting slab synchronization operation mechanism. Cutting the trolley and slab without relative motion conditions cutting billet. The return mechanism refers to the use of ordinary car movement organization. The positioning mechanism is driven by the cylinder measuring roll, so that the top below the billet, friction on the rotating the. Using pulse emitted pulse signal.

Keywords: flame cutting machine; cutting mechanism; mechanism of synchronization;  mechanism of return ;  sizing mechanism.

相关论文资料:
最新评论
上传会员 笑笑 对本文的描述:连铸坯的吨数与总铸坯(锭)的吨数之比叫做连铸比,它是衡量一个国家或一个钢铁工厂生产发展水平的重要标志之一,也是连铸设备、工艺、管理以及和连铸有关的各生产环节发展水平的......
发表评论 (我们特别支持正能量传递,您的参与就是我们最好的动力)
注册会员后发表精彩评论奖励积分,积分可以换金币,用于下载需要金币的原创资料。
您的昵称: 验证码: